Measuring a stockroom before requesting a racking layout in Malaysia

A racking supplier needs accurate dimensions to design a layout that fits your space. Measuring the stockroom yourself, or having the supplier’s team measure it at a site visit, is the first step toward an accurate quotation. Hyperack’s planning process includes site assessment and CAD layout design; preparing the information below helps the team scope the survey and drawing for your project. This guide covers what to record and how to present it.

What to measure

Start with the floor area. Record the length and width of the available storage space. If the room is not rectangular, sketch the shape and note each wall length. Measure from the inner face of the walls, not from shelving or goods that may be moved.

Clear height

Measure the distance from the finished floor to the lowest overhead obstruction. This may be the ceiling, a beam, a sprinkler head, a lighting fixture or a ventilation duct. The racking must fit below the lowest point with the required clearance, so record each obstruction’s height and position. If measurements or rack listings use feet or inches, the rack-dimensions conversion guide explains the equivalent centimetres and the difference between nominal and actual sizes.

Fixed obstructions on the floor

Mark the positions of columns, pillars, drains, fire hydrant points, electrical panels and any item that cannot be moved. Measure the distance from each obstruction to the nearest wall. These determine where racking rows can run and where aisles must be left clear.

Doors, loading bays and access points

Record the width, height and position of every door, roller shutter, loading dock and fire exit. Note which doors are used for goods in, goods out, staff access and emergency escape. The layout must keep access routes clear and may require specific aisle widths near exits.

Floor condition

Note whether the floor is level or sloped. Mention the floor finish (concrete, tiles, raised sections). If there are visible cracks, expansion joints or areas where heavy equipment has caused settlement, record their location. The racking installer may need to assess floor loading capacity separately.

What to describe alongside the measurements

  • The items to be stored: their dimensions, weights and packaging type (cartons, loose items, palletised goods)
  • How items are handled: by hand, with a trolley, pallet jack or forklift
  • The number of different products (SKUs) and how often each is accessed
  • Any existing racking or shelving to be kept, replaced or relocated
  • Future growth: whether the storage requirement is expected to increase

How to present the information

A simple hand-drawn sketch with dimensions is useful. Photograph the space from each corner and include close-ups of obstructions, doors and the floor surface. Attach a list of the items to be stored with their dimensions and weights.

If you have an existing floor plan, CAD drawing or tenancy plan, include it. Mark the areas designated for storage and any areas that must remain clear. Label dimensions as measured or estimated. For example: “Door A, rear wall: 2,400 mm clear opening (measured)” and “Beam near Bay 3: about 3,800 mm above the floor (estimated, check on site)”.

Printable worksheet: download the Hyperack Racking Quotation Brief (PDF) to organise your measurements and item details before contacting a supplier. For hand-loaded stock, see how to measure packed cartons. For palletised stock, see how to measure a loaded pallet.

Before requesting a survey or layout drawing, confirm which site checks and drawings your quotation includes. See Hyperack’s warehouse racking planning hub for product categories, published project examples and planning information. The selective pallet racking drawing in Hyperack’s catalogue (PDF) shows rack rows and aisles in plan view, and the arrangement of rack levels in the side and front views. Before settling on a rack count, compare storage density with picking and replenishment using your actual travel routes and stock mix.

Frequently asked questions

Should I measure myself or wait for a site visit?

Start with your own measurements and photographs if you can. Mark any approximate dimensions and point out where they were taken. When reviewing the quotation, ask who will verify those dimensions, what a site visit would cover and whether any drawing included is preliminary or based on measurements checked on site.

What if I do not know the floor loading capacity?

Note the floor type and any visible issues. The supplier or a structural consultant can advise whether a loading assessment is needed for the proposed system. Do not assume a floor can support any racking configuration without checking.

How do I send the information to Hyperack?

Use the contact page to start your enquiry. To share your sketch, photos and item list, email order@hyperack.com.my. For product options, see the pallet racking hub or boltless rack page. The team will confirm what additional information is needed before preparing a layout and quotation.