Cold Storage Racking Quote Checklist
- 21/11/2026
- Posted by: tendou
- Category: Racking System
Before requesting cold storage racking prices, list each room’s operating conditions, loaded pallets, handling equipment and floor information. Ask the supplier to specify the arrangement it proposes for each room and to list the checks that still need an answer. A layout priced for an ambient warehouse leaves important questions open in a chilled room or freezer.
What to include in a cold storage racking brief
- Temperature and use by room. Give the normal and expected minimum and maximum temperatures for each room. Identify doorways between warm and cold areas and explain how often staff and vehicles pass through. Note where you have observed condensation, ice or wet cleaning.
- Actual pallet loads. Give the outer length, width and loaded height, including overhang, and the maximum gross weight of each pallet type. Include pallet construction, entry direction and any different pallet sizes. Show which stock needs direct access and which stock can be stored in lanes.
- Picking and rotation. Describe how many pallets you hold for each product and when they move. If your operation picks by expiry date, explain how you identify and access the earliest-expiring pallet, including when future deliveries arrive ahead of existing stock.
- Handling equipment and access. Give the truck or handling-equipment model and its supplier’s cold-room operating limits. On the plan, mark doors, working aisles, staging areas and any places the equipment turns or transfers a load. Ask the equipment and racking suppliers to check the same route and loaded pallet.
- Floor and building information. Share the latest floor and room plans. Mark slab joints, drains, insulated floors, door thresholds, evaporators, services and fixed obstructions. Identify the person responsible for confirming floor capacity and proposed fixing locations. Ask them to review the rack loads and fixing proposal against the actual slab and insulation details.
Compare quotes against the same operating brief
- Usable positions and access. Ask which positions are usable for the stated pallets, which need direct access and which rely on clearing a lane. Request a layout that marks handover and staging space. See the warehouse racking overview when comparing access arrangements.
- Included equipment and conditions. Ask for the proposed material and finish, the conditions under which the quoted configuration can operate, and the supplier’s equipment and care instructions. If a shuttle is proposed, have the quote identify the exact unit, its operating conditions and who supplies controls, charging and service. Hyperack’s two-way shuttle page describes a system to discuss with the supplier.
- Responsibilities and exclusions. List who will verify the slab and fixings, coordinate the refrigeration layout, install the rack, confirm the as-built arrangement and supply the load notices and operating documentation. Compare delivery, installation, commissioning and aftercare using the same assumptions. The racking quotation worksheet covers the wider cost and scope comparison.
Example: a chilled dispatch room and a frozen bulk room
In a chilled dispatch room, pallets may move in and out frequently through a busy doorway. In a frozen bulk room, pallets may stay longer and handling equipment may remain in the room. A useful quote lists each room separately and shows the access, equipment and floor assumptions for both. If the supplier proposes the same arrangement for both, ask it to explain how it checked each set of conditions.
Copy this into your enquiry
- Site postcode and room names:
- Normal, minimum and maximum operating temperatures by room:
- Door use, cleaning and observed wet or icy areas:
- Pallet types, loaded sizes, weights and quantities:
- Product rotation, handling equipment and staging routes:
- Floor and room plan revisions, slab details and floor reviewer:
- Requested delivery, installation, handover and support scope:
Contact Hyperack with the brief and the available layout. Ask for the written scope and any documents or site checks needed to assess the proposed configuration.
References
- Malaysia’s Department of Occupational Safety and Health, Guidelines on Occupational Safety and Health in the Service Sector, 2004, section 2.7. The cold-store section discusses ice buildup and the inspection and maintenance needs of equipment exposed to low temperatures.
- Intercool’s engineering overview of cold-store floors explains why rack and equipment loads must be considered alongside the cold-room floor construction.


